Open Source Software TODO list: Difference between revisions

Revision as of 21:56, 23 March 2017

Usafe dd: test if the output file in the form /dev/sdXY is a block device before writing it
u-boot: generate a u-boot.fit image instead of overwriting u-boot.img
meta-swupdate: make use a packageconfig + configuration fragment
swupdate: even when hardware revision check is disabled HW_COMPATIBILITY, it says OK when it shouldn't (v2016.10.0)
- If CONFIG_HW_COMPATIBILITY is disabled, the option -H is not available and the file /etc/hwrevision is not checked (checked on v2016.10, 9224371491b9cd38b00a5fcde2e1e2845a8443ed after 2017.01) tested with -d and -i
- But in master if the HW compatibility check fails, the downloader does not exit -> Fix that bug
swupdate: add an argument to specify the cacert to be passed to curl
Yocto/Poky: factorize the configuration fragment feature
libkcapi: write a Yocto recipe
create a dockerfile that interfaces with repo and Yocto
U-Boot: socfpga_devkit node pour gpio0 and gpio2 with Sid sign-off
U-Boot: fit_check_sign should be fixed: if the .itb has been generated with -E, the signature checking will fail. Fix it!

@@ Line 1: / Line 1: @@
-* safe dd: test if the output file in the form /dev/sdXY is a block device before writing it
+* Usafe dd: test if the output file in the form /dev/sdXY is a block device before writing it
 * u-boot: generate a u-boot.fit image instead of overwriting u-boot.img
 * meta-swupdate: make use a packageconfig + configuration fragment
@@ Line 9: / Line 9: @@
 * libkcapi: write a Yocto recipe
 * create a dockerfile that interfaces with repo and Yocto
-* socfpga_devkit node pour gpio0 and gpio2
+* U-Boot: socfpga_devkit node pour gpio0 and gpio2 with Sid sign-off
+* U-Boot: fit_check_sign should be fixed: if the .itb has been generated with -E, the signature checking will fail. Fix it!