Altera Cyclone V Development Kit

From Wiki :-)
Jump to navigation Jump to search

What is the relationship between the GPIO/GPI schematics name and the GPIO number in U-Boot on the SX flavour?

This board distinguishes between GPIO (General Purpose Input/Output) and and GPI (General Purpose Input).

Each SoC/FPGA has parts dedicated to I/O. These I/O interfaces are divided into banks. There is actually no relationship between the bank number and the pin number.

In the SX board the banks connected to the HPS are 6A, 6B, 7A, 7B, 7C, 7D.

HPS_GPIOx portX pin
HPS_GPIO[0:28] portA[0:28]
HPS_GPIO[29:57] portB[0:28]
HPS_GPIO[57:84] portC[0:26]
HPS_GPI[0:13] portC[13:26]

[1] [2]

For example:

Schematics Name HPS_GPIOx portX pin
SD_CD_DAT3 HPS_GPIO47 portB[18] [3]
USER_LED_HPS[3:0] HPS_GPIO[41:44] portB[12:15] [4]
USER_PB_HPS[3:0]:USER_DIPSW_HPS[3:0] HPS_GPI[4:11] portC[17:24]

Resources

[PATCH 2/2] ARM: socfpga: Add support for HPS KEYs/SWs on SoCKit http://lists.infradead.org/pipermail/linux-arm-kernel/2016-March/416682.html

References